Tuesday, July 1, 2025
HomeGuidesHow to Solve the Warehouse Conduit Puzzle in FNAF Secret of the...

How to Solve the Warehouse Conduit Puzzle in FNAF Secret of the Mimic

Stuck on the Warehouse Conduit Puzzle in FNAF: Secret of the Mimic? This guide walks you through how to start the challenge, locate all three hidden tile pieces, and complete the tricky hexagonal pipe puzzle. Learn how to direct the hot liquid through the correct path and avoid resets by solving it perfectly on the first go.

Warehouse Conduit Power Puzzle

To begin this section of the puzzle, flip the lever located on your right. Doing so will slide open the generator’s panel and trigger a new challenge—you’ll now have to reroute power by completing a network-style puzzle. This particular puzzle is made up of hexagonal tiles, each containing segments of pipe. You can click on any tile to rotate it, adjusting the direction the pipe flows. The objective is to create an unbroken path that allows the liquid to travel from one end of the system to the other. But before you can even think about solving it, you’ll need to collect three missing tiles that are scattered around the Warehouse.

How to Find the Three Missing Tiles

Tile 1

Right after entering the Warehouse, look over to the right side. Behind the large Rocktopus display, you’ll spot the first missing tile waiting to be picked up.

Tile 2

Next, move toward the side section of the room. You’ll notice a tram hanging up high. Find the nearby lever and pull it—this lowers the tram and also unlocks the adjacent gate. Once the tram is on the ground, hop inside to grab the second tile.

Tile 3

To get the last one, head to the opposite end of the Warehouse—far from where you entered. Search the left side for some shelves with an elevator tucked behind them. Crouch to squeeze under the shelves and reach the elevator. Then use the crank to power it up, and you’ll find the final tile inside.

How to Complete the Puzzle

After collecting all the pieces, return to the puzzle area. You’ll see a nozzle in the bottom right corner that starts releasing hot liquid shortly after the puzzle begins. Your job is to rotate the tiles so that the liquid can flow smoothly from that nozzle to the one located in the bottom left corner.

There’s a catch—you don’t get to pause or redirect the liquid once it starts moving. If it hits a wrong turn or dead end, you’ll have to reset the whole thing and try again. So before activating the flow, double-check your path and make sure it’s all connected.

RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisment -

Most Popular

Recent Comments