In Tony Hawk’s Pro Skater 3+4, one of the collectables you’ll need to get in the Foundry level is the hidden Logo. But you can’t reach it right away, first, you’ll need to unjam all five valves scattered around the level. Once they’re all cleared, a secret area opens up near the starting point. This guide will show you exactly where to find each valve and how to reach the Logo once the path is unlocked.
Foundry Logo Location in Tony Hawk’s Pro Skater 3+4
All five valves are located around the outer edges of the map, and you can unjam them by grinding the rail in front of each one. Here’s where to find them:
- Valve number 1: From the start, head down the left ramp, and you’ll see the first valve right there.
- Valve number 2: Keep going past the flaming tanks and look on the left side to find the second valve.
- Valve number 3: Continue along the path, then go down the next ramp to spot the third valve.
- Valve number 4: After that, head up the ramp directly in front of you, and you’ll see valve number 4 on the left side.
- Valve number 5: For the last one, skate past the half-pipe, and you’ll find valve number 5 again on the left side.
Just grind each of the rails in front of them, and you’re good to go.
You’ll only be able to get this collectable after you unjam all five valves. Once that’s done, it unlocks the generator core right behind you at the start of the level. Skate into the generator, and when you hit the ramp inside, use a Vert Break (press R2/RT as you launch into the air) to land on the spiral path above. From there, just follow the spiral upward, and you’ll find the collectable at the very top.
